MQTT Alarm Control Panel

MQTT Alarm Control Panel

Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging.

MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.

The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.

Features

* Stream video, detect motion, detect faces, and read QR Codes.

* Capture and emailing images when the alarm is disabled.

MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).

* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).

* Day/Night mode themes based on MQTT sun value.

* Fingerprint unlock support to disable the alarm. (on supported devices).

* Optional screensaver mode using a digital clock or Imgur images.

* Three day MQTT Weather forecast.

* Home Automation Platform webpage support for viewing home automation dashboards.

The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things

For the complete setup instructions and additional information, please visit the Project Home Page.

Home Assistant

Home Assistant's MQTT Manual Alarm Control Panel

Project's Home Page

Raspberry Pi Version

Support: mister@thanksmister.com

MQTT警报控制面板

重复使用旧的Android设备作为家庭报警控制面板，与Home Assistant或任何支持MQTT消息传递的家庭自动化平台集成。

MQTT报警控制面板是一个报警控制面板，用于支持MQTT消息传递的家庭自动化平台。该应用程序最初是为 Home Assistant的 MQTT手动控制面板 构建的。但是，该应用程序可以与支持MQTT消息传递协议的任何家庭自动化平台一起使用，例如Jeedom，openHab或Node-Red。

报警控制面板充当家庭报警系统的接口，允许使用MQTT进行双向通信。您可以将警报状态设置为离开或居住，或使用代码撤防警报。您的家庭自动化系统控制触发警报器的传感器或自动化或通知用户可能的入侵。

功能的

*流视频，检测动作，检测面部和读取QR码。

*禁用警报时捕获和通过电子邮件发送图像。

MQTT命令用于远程控制应用程序（说出文本，播放音频，显示通知，警报）。

*通过MQTT（温度，光照，压力，电池等）报告设备传感器数据。

*基于MQTT太阳值的日/夜模式主题。

*指纹解锁支持以禁用警报。 （在支持的设备上）。

*使用数字时钟或Imgur图像的可选屏幕保护模式。

*三天MQTT天气预报。

*家庭自动化平台网页支持查看家庭自动化仪表板。

报警面板设计用作专用设备，可在全​​屏模式下连续运行。报警面板是开源的，可在GitHub上使用。还有一个使用Android Things在Raspberry Pi上运行的版本

有关完整的设置说明和其他信息，请访问项目主页。

家庭助理

Home Assistant的MQTT手动报警控制面板

项目主页

Raspberry Pi版本

支持：mister@thanksmister.com

MQTT Alarm Control Panel

Reuse and old Android devices as a home alarm control panel that integrates with Home Assistant or any home automation platform that supports MQTT messaging.

MQTT Alarm Control Panel is an alarm control panel for use with home automation platforms that support MQTT messaging. The application was originally built for Home Assistant'sMQTT Manual Control Panel. However, the application can be used with any home automation platform that supports the MQTT messaging protocol such as Jeedom, openHab, or Node-Red.

The alarm control panel acts as an interface for your home alarm system and allows for two way communication using MQTT. You can set the alarm state to away or home, or disarm the alarm using a code. Your home automation system controls the sensors or automation that triggers the siren or notifies users of possible intrusion.

Features

* Stream video, detect motion, detect faces, and read QR Codes.

* Capture and emailing images when the alarm is disabled.

MQTT commands to remotely control the application (speak text, play audio, display notifications, alerts).

* Device sensor data reporting over MQTT (temperature, light, pressure, battery, etc.).

* Day/Night mode themes based on MQTT sun value.

* Fingerprint unlock support to disable the alarm. (on supported devices).

* Optional screensaver mode using a digital clock or Imgur images.

* Three day MQTT Weather forecast.

* Home Automation Platform webpage support for viewing home automation dashboards.

The alarm panel is designed to be used as a dedicated device which runs continuously in full-screen mode. The alarm panel is open source and available on GitHub. There is also a version that runs on a Raspberry Pi using Android Things

For the complete setup instructions and additional information, please visit the Project Home Page.

Home Assistant

Home Assistant's MQTT Manual Alarm Control Panel

Project's Home Page

Raspberry Pi Version

Support: mister@thanksmister.com